How To Design For Digital Printing

If you send your design file in the wrong format for printing, then your output won’t come out to be good. Besides putting a lot of thought into the graphics and visuals, you also need to make sure that the files are print-ready. This will prevent getting less satisfactory print. Here are some tips on how to design for digital printing.

Colours

Colours - How To Design For Digital Printing

You should first know the difference between CMYK and RGB files. CMYK is the four colour process that consists of Cyan, Magenta, Yellow, and Black. You need to save the images and colours to CMYK before printing. RGB, on the other hand, stands for Red, Green, and Blue. For digital printing, it is recommended that you use CMYK files.

Image quality

You must save the images at 300 dpi (dots per inch). If you go well below 200 dpi, then you will not get a satisfactory result.

You cannot improve the design by adjusting resolutions in Photoshop or other software.

When you download images from the website, most of them are of low resolution. This improves load speeds but gives a lower-quality picture. So, if you are looking for an image on the internet for digital printing, make sure it’s 300 dpi.

Formatting

Formatting - How To Design For Digital Printing

You should format the image or file before printing. Provide a timeline, live area, and bleed, which is the edge of the document which gets trimmed off after printing. It is better to make the image larger than what you intend to have so that you can cut it down later on to the right size. If you don’t include a bleed line, you will get white borders all around the image.

Software

You should use the right software for design. If you are working on photos, then Photoshop is the best software to use. If it’s a text document that you want to print, you should use MS Word. Logos are best handled in Adobe Illustrator.

Saving files

Saving files - How To Design For Digital Printing

Your files should be saved in the right format. For example, Photoshop designs must be saved in .psd format and Illustrator in .ai format. If you don’t save it in the right format, you won’t be able to print it properly.

If you remember these tips when designing something for digital printing, your print quality will be good. You won’t have to rework your design to improve the quality of printing.